Email us:sale@zoomjo.com
Model: Ø2.2×9m-Ø4.5×18m
Capacity: 10-100TPD
Applied material: PVC material, municipal waste, medical waste, sludge waste, oily sludge, industrial waste
Materials:(different sizes for 120 kinds of stones)
benonite
cement
clay
coals
Applied material:
Waste incineration rotary kiln treatment of solid waste, waste in the rotary kiln to complete the process of water evaporation, volatile analysis out, fire and combustion, ash slag part of the bottom of the second combustion chamber discharge, the resulting flue gas into the second combustion chamber, in the second combustion chamber and secondary combustion air mixing, to achieve flue gas recovery combustion, to achieve safe tail gas emission standards.
Slag type incinerator, rotary kiln temperature control at 800 degrees -900 degrees, hazardous waste through oxidation and melting to achieve destruction, rotary kiln kiln tail discharge is mainly slag, after cooling slag loose better, due to the furnace temperature is not high, hazardous waste on the rotary kiln refractory materials of high temperature erosion and oxidation is not strong, for this reason, the service life of refractory materials is relatively long, inside Furnace body "hanging wall" phenomenon is not serious.
Slag type rotary kiln incinerator is mainly to deal with some single, more toxic hazardous waste, the temperature is generally above 1500 degrees, in order to improve the destruction rate. Due to the treatment of different objects, complex composition, some hazardous waste melting point in 1300 degrees -1400 degrees above, so this type of incinerator temperature control is more difficult, the operation of higher requirements. As the slag rotary kiln incinerator chamber temperature is higher, the auxiliary fuel consumption increases, bringing the direct consequences of the rotary kiln refractory materials, insulation material fuel consumption, mechanical losses and operational difficulties are higher.
Pyrolysis rotary kiln incineration kiln temperature control at 700 degrees -800 degrees, due to hazardous waste in the rotary kiln pyrolysis gasification generated combustible gas into the second combustion chamber combustion, can greatly reduce the amount of fuel consumption, in addition, due to low temperature, heat loss, flue gas volume is three kinds of treatment process is low, followed by a reduction in installed capacity, operating costs greatly reduced, but the disadvantage is that the residual amount of ash High, ash incineration is not complete, certain key technologies, there has been a breakthrough, this incineration method represents the rotary kiln incineration of hazardous waste technology development direction, especially for resource-saving society, this is particularly important.
1. Low cost: High temperature material contacting refractory material. Easy to replace the furnace lining.
2. Simple transmission mechanism: The transmission mechanism is in the kiln shell. Easy maintenance of equipment.
3. Ensure that harmful gases do not leak out: good sealing measures and negative pressure in the furnace chamber.
4. Easy to operate and maintain: high operation rate of equipment. The annual operation rate is generally up to 90%.
5. Strong adaptability to incinerants: can burn solid waste at the same time. Liquid. Colloid. Gas.
Model(m) | Rotation speed(r/min) | Reducer model | Motor model | Motor Power (kw) |
Capacity (t/d) |
φ2.2×9 | 0.2~2 | MainZSY315-80 | MainYVF3-200L1-6 | 18.5 | 20-30 |
AuxiliaryZSY160-80 | AuxiliaryYE3-100L2-6 | 3 | |||
φ2.6×10 | 0.15~1.5 | MainZSY355-71 | MainYVF3-225M-6 | 30 | 30 |
AuxiliaryZSY160-40 | AuxiliaryYE3-112M-4 | 4 | |||
φ2.5×13 | 0.2~2 | MainZSY355-63 | MainYVF3-280S-6 | 45 | 35 |
AuxiliaryZSY160-40 | AuxiliaryYE3-112M-4 | 4 | |||
φ3.0×11 | 0.2~2 | MainZSY355-56 | MainYVF3-280S-6 | 45 | 40 |
AuxiliaryZSY160-40 | AuxiliaryYE3-112M-4 | 4 | |||
φ3.2×14 | 0.2~2 | MainZSY400-56 | MainYVF3-280M-6 | 55 | 50 |
AuxiliaryZSY160-40 | AuxiliaryYE3-132S-4 | 5.5 | |||
φ3.3×15 | 0.2~2 | MainZSY400-56 | MainYVF3-280M-6 | 55 | 60 |
AuxiliaryZSY160-40 | AuxiliaryYE3-132S-4 | 5.5 | |||
φ3.5×16 | 0.2~2 | MainZSY400-50 | MainYVF3-280M-6 | 55 | 60 |
AuxiliaryZSY160-40 | AuxiliaryYE3-132S-4 | 5.5 | |||
φ3.8×16 | 0.1-1.1 | MainZFY500-100 | MainYVF3-280M-6 | 55 | 50-70 |
Company Industry Experience(40 Years)
Leading Manufacturer and Export Base of Crushing and Mining Machinery
Whatsapp Contact person
Please feel free to write down your requirement in the form below. you will get the reply in 1 hour. We will protect your privacy info.
Copyright © 2022-2024 Henan Zoomjo Group Manufacturing Co., Ltd. All Rights Reserved.